Best Home Gym with Leg Press of 2026

Two independent 138-pound stacks are the reason to look at the SunHome 925. It is a Smith machine and home gym in one frame, and two people can work at once without swapping pins or waiting for the other station. The 96.85-inch depth and 86.61-inch height make it the biggest machine here after the Body-Solid, so it belongs in a garage or spare room, not a corner of a living room.

We like the dual-stack layout for couples because it turns a single footprint into two training stations. One person can press while the other pulls, and the Smith machine adds a barbell-style option the other picks do not have. The 100-plus exercise combinations are more than most households will use, but the point is that you do not have to reset the machine between partners. The 2-by-2-inch steel frame is reassuring for a shared machine.

The fixed bench and seat are where the SunHome gives ground. The seat back and height do not adjust, and shorter users may not reach the leg press comfortably; taller users can run out of range on some cable exercises. If you and your training partner are close in height and average build, the dual-stack convenience outweighs that. If not, the Sportsroyals or Mikolo is the safer fit.

The leg press is usually where an all-in-one starts to feel like a compromise. On the Sportsroyals HPM02, it gets a dedicated station, and the footplate adjusts both up and down and front to back. That is the detail we kept coming back to: it lets you line up your hips and knees instead of folding yourself around a fixed pedal. The seat has four positions, and the butterfly arms have five, so the machine can be set for different bodies rather than one average build.

We think that adjustability is what makes this the best default here. The 150-pound stack runs in 12 levels and feeds the leg press, chest press, lat pulldown, low row, preacher curl, and core station. The 35-plus exercise range is enough to replace a basic gym routine without turning a spare room into a commercial floor. The frame uses 70 by 50mm steel and a wide H-base, and the stored leg extension and preacher curl pads keep the middle of the machine clear when you switch stations.

The footprint is 75 by 51 inches with an 81-inch height, which is a workable garage or basement size, but this is still a 314-pound machine that wants a permanent spot. The labeled hardware and video are a real help when you are working through the pulley routing, and the stored pads keep the center of the machine clear between stations.

At 36.3 inches wide, the Mikolo HGS Pro is the one here that can slide into a narrow basement bay without crowding the room. The 75-inch depth and 80-inch height still need planning, but the narrow frame is the reason it earns a spot: most all-in-ones with a leg press are wider than this. The 10-in-1 layout covers chest press, pec fly, lat pulldown, low row, leg extension, leg press, preacher curl, core, calf, and seated row, so you are not giving up stations to get the smaller footprint.

We like the removable preacher pad and leg press parts because they open up the center of the machine for lat work and rows. The 154-pound stack runs in 12 levels, and the cable bar rides on a bearing that makes wrist position less fussy during pressing. The frame is 14-gauge steel with a steel sheet guarding the counterweight, and the machine feels planted when you load the stack.

The seat is fixed, though, and the leg press and standing leg curl do not adjust as much as shorter users need. If you are around average height, the compact package is easy to live with; if you are much shorter or taller, the fixed seat is the first thing to check.

The Body-Solid EXM2500LPS is the one here that feels like a piece of gym equipment rather than a home appliance. The frame is 2-by-4-inch 12-gauge steel, the assembled weight is 571 pounds, and the footprint is 83 by 79 by 89 inches. This is the machine you buy when the room is already dedicated to training.

The leg press is the reason it belongs here. It is a separate station with its own footplate, and the 210-pound stack gives you more lower-body headroom than the 150-pound machines. The no-cable-change design is a practical touch: you move between the lat pulldown, low row, and leg press without rerouting cables, which keeps a circuit moving. The sealed bearings and heavy frame make the press and row stations feel solid.

We think the premium is justified for a buyer who wants one machine for the long haul. The six stations cover the major muscle groups, and the lifetime in-home warranty covers the frame and all parts. The catch is the setup: the instructions are illustration-heavy and not very detailed, and this is not a one-person afternoon project. If you are not comfortable assembling a 571-pound machine, budget for help.

The SincMill SCM-1148L is one of the few machines here that names a leg press attachment and still keeps a 40.7-inch width. The 148-pound stack, 69-inch depth, and 10-year warranty make it look like a broad all-in-one, and the quick-release latches and included curl pad, ankle straps, and top and bottom bars give it more station variety than the basic layout suggests. The leg press is a pedal-style attachment rather than a full station, and that distinction matters.

We noted the thick steel frame and the 148-pound stack, which are enough for general strength work, and the 10-year warranty is the longest here after Body-Solid's lifetime coverage. The quick-release latches make switching between the lat bar, row bar, and leg press pedal faster than swapping pins and chains, and the included curl pad and ankle straps add useful variety.

The leg press is where we hesitate. The pedal attachment gives you a leg press, but the range is short for taller users, and the resistance can feel light or uneven at the bottom of the stroke. The seat and pedals adjust, but not enough for every body. If you are average height and want a broad exercise menu with a long warranty, it is worth a look; if the leg press is the main event, the Sportsroyals is the stronger choice.